Products and systems
in which you can trust

Replacement parts Tower packing, drift eliminators, air inlet louvres

Tower packing (cooling or heat exchanger sheets) made from self-extinguishing PP or PVC sheets offer increased effectiveness for heat exchange with water/air.

Wabeneinbau-19mm
Tower packing mm 19 (PVC or PP)

Achieves the best heat exchange values with clean to moderately contaminated cooling water, with a max. temperature of +55°C (PVC) and +80°C (PP).

DIMENSIONS:
mm 1200 x 600 x 300 (h) PVC
mm 1200 x 300 x 300 (h) PP
Other module dimensions available on request.

DESIGN:
Inserts made from thermo-formed and joined self-extinguishing PVC sheets, ASTM E-84-certified (with the exception of the version in PP).

The PVC tower packing is supplemented with thick ZIG-ZAG panels, which protect the tower packing against mechanical wear caused by the sprayed water.

Wabeneinbau-12mm
Tower packing mm 12 (PVC or PP)

Achieves the best heat exchange values with clean cooling water with a max. temperature of +55°C (PVC) and +80°C (PP).

DIMENSIONS:
mm 1200 x 600 x 300 (h) PVC
mm 1200 x 300 x 300 (h) PP
Other module dimensions available on request.

DESIGN:
Inserts made from thermo-formed and joined self-extinguishing PVC sheets, ASTM E-84-certified (with the exception of the version in PP).

The PVC tower packing is supplemented with thick ZIG-ZAG panels, which protect the tower packing against mechanical wear caused by the sprayed water.

Gittereinbau
Gride fill (PP)

Suitable for heavily contaminated cooling water. Delivers a good thermal performance, similar to that of the honeycomb insert.

DIMENSIONS:
mm 910 x 600 x 450 (h)
Other module dimensions available on request.

DESIGN:
On account of its high mechanical rigidity, the practical grille insert can be walked on without step protection.
Available in 3 different thicknesses.
Areas of application: with a fixed suspended matter content of 300 ppm or more.

Tropfenabscheider
Drift eliminator panels (PVC or PP)

Developed for vertical air flows. Allows for a geometry with two deflections of the air stream, with an efficiency level of 99% (at a nominal speed of 3 m/s).

DIMENSIONS:
mm 1200 x 300 x 120 (h)

DESIGN:
Suitable for inserts made from thermo-formed and joined PVC sheets.

Self-extinguishing (with the exception of the version in PP).

Other types of colling tower fills available on request.